CJ960
8-channel low-side power switch
Application & Technical Summary
CJ960 provides short-circuiting protection for eight low-side stages. All channels are controlled either via SPI, micro second channel (MSC) or parallel interface.
- Control of OUT1 to OUT8 by MSC or via SPI.
- Control of OUT1 to OUT6 by input pin.
Product benefits
- Multiple control interfaces (SPI, MSC, parallel)
- Extensive diagnostic functions for each output channel: Short circuit to battery, short circuit to ground, open load, overtemperature warning
- Stages are disabled when VDD is too low or too high. The same applies when the MSC monitoring detects an error, μC-reset is active or reset pin is pulled low.
Protected output stages
Clamping voltage of 55V (typ.) on all outputs
Technical Features
|
Type
|
8-channel low-side power switch
|
|
Package
|
TQFP64_ePad
|
|
Features
|
|
|
Outputs
|
|
|
Control inputs
|
-
|
|
Interface
|
SPI, µsec bus
|
|
Vbat typ [V]
|
14
|
|
Tj min [°C]
|
-40°C
|
|
Tj max [°C]
|
150°C
|
-
TQFP64 _ePad (10 × 10 mm)
