CAN IP modules
Smart implementation of CAN bus communication abilities into ASIC, FPGA, and stand-alone devices.
XS_CAN
The XS_CAN is a low gate count CAN IP module that can be realized as stand-alone device, as part of an SoC, as part of an ASIC, or on an FPGA.
It supports CAN CC (Classical CAN), CAN FD (CAN with Flexible Data-rate) and CAN XL (CAN with Extended Length) communication according to ISO11898-1:2024 and can be a CAN FD light commander up to 8Mbit/s. For connection to the CAN physical layer, additional transceiver hardware is required. The XS_CAN IP is developed as a Safety Element out of Context (SEooC) according to ISO 26262-11:2018 Clause.
Developed according to the automotive cybersecurity standard ISO 21434.
Intermediate Delivery available.
FDLR_CAN
The FDLR_CAN is a CAN IP module that can be implemented in an ASIC, FPGA, and mixed-signal device.
It supports CAN FD light responder communication according to ISO 11898-1:2024. For connection to the CAN physical layer, additional transceiver hardware is required. The FDLR_CAN is being developed as Safety Element out of Context (SEooC) according to ISO 26262-11:2018 Clause 4. Safety Manual and FMEDA are available on request.
M_CAN
The M_CAN is a CAN IP module that can be realized as stand-alone device, as part of an ASIC, or on an FPGA. It supports CAN CC (Classical CAN) and CAN FD (CAN with Flexible Data-rate) communication according to ISO11898-1:2024 and can be a CAN FD light commander. For a connection to the CAN physical layer, additional transceiver hardware is required. The M_CAN is also available as M_TTCAN, to additionally support Time-Triggered CAN according to ISO11898-4. The M_CAN has been developed as Safety Element out of Context (SEooC) according to ISO 26262-11:2018, Clause 4. Safety Manual and FMEDA are available on request.
> More information about M_CAN IP
Optional Add-ons:
TSU - Timestamping unit for MCAN
The timestamping unit supplies the M_CAN IP-module with hardware timestamps according to CiA 603 and AUTOSAR specification.
DMU - Direct memory access unit
The DMU supports DMA transfers between M_CAN message RAM and system memory
X_CAN
The X_CAN is a CAN IP module that can be implemented in a SoC (System on Chip).
It supports CAN CC (Classical CAN), CAN FD (CAN with Flexible Data-rate), and CAN XL (CAN with Extended Length) communication according to ISO 11898-1:2024 and can be a CAN FD light commander. For connection to the CAN physical layer, additional transceiver hardware is required. The X_CAN is being developed as Safety Element out of Context (SEooC) according to ISO 26262-11:2018 Clause 4. Safety Manual and FMEDA are available on request.
Mandatory License of CAN Protocols
Mandatory License of CAN Protocols
The CAN Protocols are patented products developed by Robert Bosch GmbH.
A CAN Protocol License is required for all implementations of CAN FD, CAN FD Light, TTCAN and CAN XL modules.