SMP470
Pressure sensor for side and front impact sensing
应用和技术摘要
SMP470 is an integrated pressure sensor module, designed for use in automotive airbag applications. SMP470 can be mounted in a sensor-satellite housing with a pressure inlet, typically placed in the car’s side doors (side airbag application) or in the front bumper (pedestrian protection). SMP470 detects rapid pressure changes that occur in cavities e.g. in passenger side doors during a side impact or in designated deformation volumes (e.g. silicon tube) in pedestrian protection applications.
The module provides a normalized signal that is proportional to the pressure change, independent of ambient pressure and temperature. It also provides signals that are proportional to the slowly varying ambient pressure and temperature measured in the module. The signals are transmitted digitally via a PSI5 interface to the airbag control unit.
Product benefits
- Digital interface for pressure and temperature
- Short disconnection of power supply does not lead to reset of sensor
- Digital low-pass filter on-chip
- End of line programming via PSI5
- Transmission of an individual part number during initialization
- Developed according to ISO26262:2011
Reliable detection
of side or front impacts
技术特点
Type
|
Absolute pressure sensor
|
Package
|
LGA8 (solderless contacting only)
|
Ambient pressure range
Temperature range |
45.5 kPa – 110 kPa (enhanced: 140 kPa)
-40 °C - 125 °C |
Interface
|
PSI5 V1.3 or PSI5 V2.1
|
Data resolution
|
10 bit or 16 bit
16 bit |
Sensitivity
|
53.53 LSB/kPA
1 K/LSB |
Tolerance
|
±3 kPa
±10 K |
Supply voltage
|
5 V – 11 V
|
Supply current
|
< 7.5 mA (sink current 30 mA)
|
Operating temperature
|
-40°C to 125°C
|