CAN Protocols
CAN XL Protocol
CAN XL (Controller Area Network with Extended Length) provides a superior solution for data rates of up to 20Mbit/s by maintaining the advantages of the CAN protocol like collision-resolution by non-destructive arbitration. It expands the number of data bytes per CAN frame up to 2048 bytes.
With a bit rate of up to 20 Mbit/s in the data phase, CAN XL fills the gap between CAN FD and 100BASE-T1 (Ethernet). CAN XL protocol controllers are also able to perform Classical CAN and CAN FD communication.
CAN FD Protocol
CAN FD (CAN with Flexible Data-rate) was introduced by Bosch in 2012 to overcome the Classical CAN's bit rate limitation to 1 Mbps and to expand the number of data bytes per CAN frame from up to 8 to up to 64, thereby closing the gap between Classical CAN and other protocols. This is achieved by a modified CAN frame format where the bit rate can be switched to faster value inside the CAN frame and by a new data length coding.
CAN FD is standardized as ISO11898-1:2015. CAN FD protocol controllers are also able to perform Classical CAN communication.
CAN FD light Protocol
CAN FD light is a lightweight version of CAN FD. It is intended for low cost application with one commander (master) controller and numerous responder (slave) controller.
For a CAN FD light responder (slave) there is no need for an external crystal to have lower cost.
Existing CAN FD / XL IP can be used as CAN FD light commander (master).
> More information about CAN FD light
Mandatory License of CAN Protocols
Mandatory License of CAN Protocols
The CAN Protocols are patented products developed by Robert Bosch GmbH.
A CAN Protocol License is required for all implementations of CAN FD, CAN FD Light, TTCAN and CAN XL modules.
GTM技术交流日
IP技术交流日为全球 OEM、一级供应商、半导体厂商、生态环境供应商及其他相关方提供了理想的交流平台。
与会者可以共享信息,并积极参与关于 IP 领域最新发展的讨论。
IP亚太区技术交流日2024
3.14-15,2024,中国,上海
GTM技术交流日2022
9.22-23,2022,斯图加特,德国
GTM技术交流日2017
10.10-11,2017,底特律,密歇根州,美国